A Prototypic Design
Approach for Automotive Telematics On-board Unit Platform (ATOP) Using ARM
Powered NFC (Near Field Communication) Technology
SYNOPSIS:
In today’s fastest world the use of
vehicle is unavoidable as well as the accident occurring due it is also a
biggest issue. So we have designed the
system in a move to save lives on the road by measuring the pressure of the
vehicle. Current estimates suggest annually there are around 43,000 deaths
across Europe’s road networks. Experts believe this could be reduced
significantly if the load of the vehicle is maintained as well as the traffic
is also maintained by allowing the heavy vehicles only in the specific time.
PROBLEM STATEMENT:
•
Measuring
the load and perimeters are crucial
•
Detection of the vehicle is difficult
•
Miscellaneous
of vehicle in the city for long
durations
PROPOSED SYSTEM:
In this proposed system we have
designed the system with three applications. First application is to calculate
the strain of the vehicle. By using strain sensor, pressure of the vehicle is
monitored. When the strain exceeds the set up value the information is suddenly
passed to the RTO office through wireless technology. By using this application
over loading of the vehicle can be avoided which may lead to an accident. So by
using this system even if the owner tried to overload his vehicle he can’t do
it. By using this system driver can drive his vehicle safely and accident
freely.
In the second application traffic jam
can be reduced by maintaining the specific time for heavy vehicle. Heavy
vehicles should enter the city only at the specific time. If they entered at
some other time information is transferred to the control room.
The third application is used to
maintain the traffic signal properly. If any vehicle crosses the road when the
signal is red .Then the vehicles id is passed to the nearest control room.
Intruder sensor is used to detect whether the vehicle crosses the road in the
proper way or not.
BLOCK DIAGRAM:
Vehicle section:
Control Room Section:
Signal Section:
REQUIREMENTS:
Hardware Requirements:
Ø Microcontroller
Ø RF module
Ø Decoder/encoder
Ø Pressure sensor
Software Requirements:
Ø Keil IDE
Ø Flash magic
Ø ORCAD
Ø Embedded C
APPLICATIONS:
•
Highly
Reliable.
•
Traffic
signal will be controlled
•
Automatic
fine can be charged using wireless technology
•
Much
more efficient than the existing system.
0 comments:
Post a Comment